Parameterization
A parameter file is mandatory for the Texture submodule of FORCE HLPS.
All parameters must be given, even if they are not used. All parameters follow common tag-value notation. Rudimentary checks are performed when using this file.
The following parameter descriptions are a print-out of force-parameter
, which can generate an empty parameter file skeleton.
++PARAM_TXT_START++
# INPUT/OUTPUT DIRECTORIES
# ------------------------------------------------------------------------
# Lower Level datapool (parent directory of tiled input data)
# Type: full directory path
DIR_LOWER = NULL
# Higher Level datapool (parent directory of tiled output data)
# Type: full directory path
DIR_HIGHER = NULL
# This is the directory where provenance files should be saved.
# Type: full directory path
DIR_PROVENANCE = NULL
# MASKING
# ------------------------------------------------------------------------
# Analysis Mask datapool (parent directory of tiled analysis masks)
# If no analysis mask should be applied, give NULL.
# Type: full directory path
DIR_MASK = NULL
# Basename of analysis masks (e.g. WATER-MASK.tif).
# Masks need to be binary with 0 = off / 1 = on
# Type: Basename of file
BASE_MASK = NULL
# OUTPUT OPTIONS
# ------------------------------------------------------------------------
# Output format, which is either uncompressed flat binary image format aka
# ENVI Standard, GeoTiff, or COG. GeoTiff images are compressed with LZW and hori-
# zontal differencing; BigTiff support is enabled; the Tiff is structured
# with striped blocks according to the TILE_SIZE (X) and BLOCK_SIZE (Y) speci-
# fications. Metadata are written to the ENVI header or directly into the Tiff
# to the FORCE domain. If the size of the metadata exceeds the Tiff's limit,
# an external .aux.xml file is additionally generated.
# Type: Character. Valid values: {ENVI,GTiff,COG,CUSTOM}
OUTPUT_FORMAT = GTiff
# File that contains custom GDAL output options. This is only used if
# OUTPUT_FORMAT = CUSTOM. If OUTPUT_FORMAT = CUSTOM, this file is mandatory.
# The file should be written in tag and value notation. The first two lines
# are mandatory and specify GDAL driver and file extension, e.g. DRIVER = GTiff
# and EXTENSION = tif. The driver name refers to the GDAL short driver names.
# Lines 3ff can hold a variable number of GDAL options (up to 32 are allowed).
# Please note: with opening output options up to the user, it is now possible to
# give invalid or conflicting options that result in the failure of creating files.
# Type: full file path
FILE_OUTPUT_OPTIONS = NULL
# This parameter controls whether the output is written as multi-band image, or
# if the stack will be exploded into single-band files.
# Type: Logical. Valid values: {TRUE,FALSE}
OUTPUT_EXPLODE = FALSE
# This parameter controls whether the output is written in one folder,
# or whether several subfolders per product type will be generated to better
# structure the output.
# Type: Logical. Valid values: {TRUE,FALSE}
OUTPUT_SUBFOLDERS = FALSE
# PARALLEL PROCESSING
# ------------------------------------------------------------------------
# This module is using a streaming mechanism to speed up processing. There
# are three processing teams (3 Threads) that simultaneously handle Input,
# Processing, and Output. Example: when Block 2 is being processed, data
# from Block 3 are already being input and results from Block 1 are being
# output. Each team can have multiple sub-threads to speed up the work. The
# number of threads to use for each team is given by following parameters.
# Type: Integer. Valid range: [1,...
NTHREAD_READ = 8
NTHREAD_COMPUTE = 22
NTHREAD_WRITE = 4
# Use STREAMING = FALSE to disable streaming. This will perform reading,
# computing and writing after one another in sequential mode.
# Each operation will still be parallelized with above settings.
# Disabling streaming might be necessary for some UDFs that otherwise
# produce threading conflicts with the internally used OpenMP functionality.
# Type: Logical. Valid values: {TRUE,FALSE}
STREAMING = TRUE
# This module will display progress information on screen. By default, the
# progress information overwrites itself to produce a pretty displayal.
# However, this can cause error messages (or printing in UDFs) to be overwritten.
# If disabled (FALSE), the progress information will be simply be appended
# on screen (stdout).
# Type: Logical. Valid values: {TRUE,FALSE}
PRETTY_PROGRESS = TRUE
# PROCESSING EXTENT AND RESOLUTION
# ------------------------------------------------------------------------
# Analysis extent, given in tile numbers (see tile naming)
# Each existing tile falling into this square extent will be processed
# A shapefile of the tiles can be generated with force-tabulate-grid
# Type: Integer list. Valid range: [-999,9999]
X_TILE_RANGE = 0 0
Y_TILE_RANGE = 0 0
# Allow-list of tiles. Can be used to further limit the analysis extent to
# non-square extents. The allow-list is intersected with the analysis extent,
# i.e. only tiles included in both the analysis extent AND the allow-list will
# be processed.
# Optional. If NULL, the complete analysis extent is processed
# Type: full file path
FILE_TILE = NULL
# This parameter can be used to override the default blocksize of the input
# images (as specified in the datacube-definition.prj file). This can be
# necessary if the default blocksize is too large for your system and you
# cannot fit all necessary data into RAM. Note that processing of larger
# blocksizes is more efficient. The tilesize must be dividable by the blocksize
# without remainder. Set to 0, to use the default blocksize
# Type: Double. Valid range: 0 or [RESOLUTION,TILE_SIZE]
BLOCK_SIZE = 0
# Analysis resolution. The tile (and block) size must be dividable by this
# resolution without remainder, e.g. 30m resolution with 100km tiles is not possible
# Type: Double. Valid range: ]0,BLOCK_SIZE]
RESOLUTION = 10
# FEATURES
# ------------------------------------------------------------------------
# This parameter specifies the feature(s) used for the analysis. The base-
# name of a tiled dataset needs to be given, followed by an integer list that
# specifies the bands that are to be used. This parameter can be given
# multiple times if multiple features are to be used. The features are used
# in the same order as given here, thus keep this in mind when training
# machine learning models with force-train.
# Type: Basename of file, followed by Integer list
INPUT_FEATURE = 2018-2018_001-365_LEVEL4_TSA_SEN2L_NDV_STM.tif 1 2 3 4 5 6
INPUT_FEATURE = 2018-2018_001-365_LEVEL4_TSA_SEN2L_NIR_STM.tif 7 8 9 10 11 12 13
INPUT_FEATURE = 2018-2018_001-365_LEVEL4_TSA_SEN2L_RED_STM.tif 1 2 3 4 5 6 7 8 9 10 11 12 13
# Nodata value of the features.
# Type: Integer. Valid values: [-32768,32767]
FEATURE_NODATA = -9999
# Should nodata values be excluded if any feature is nodata (TRUE). Or just
# proceed (FALSE)?
# Type: Logical. Valid values: {TRUE,FALSE}
FEATURE_EXCLUDE = FALSE
# TEXTURE
# ------------------------------------------------------------------------
# This parameter defines the radius of the kernel used for computing the
# texture metrics (in projection units, commonly in meters).
# Type: Double. Valid values: ]0,BLOCK_SIZE]
TXT_RADIUS = 50
# This parameter defines the number of iterations for running the morpho-.
# logical operations.
# Type: Integer. Valid values: [1,1000]
TXT_ITERATION = 1
# Which Texture Metrics should be computed? There will be one TXT output file
# for each metric with as many bands as there are features (in the same order).
# Currently available metrics are dilation, erosion, opening, closing, gradient,
# blackhat and tophat.
# Type: Character list. Valid values: {DIL,ERO,OPN,CLS,GRD,BHT,THT}
TXT = DIL ERO BHT
# This parameter defines the basename for the output files. The basename will
# be appended by Module ID, product ID, and the file extension.
# Type: Character.
TXT_BASE = TEXTURE
++PARAM_TXT_END++